Payment & Shipping Terms:
|Product Name:||Spray Gun||CAS:||51852-81-4|
|Application:||Pipes /door And Window Frames||Toxicity:||None|
High Strength Polyurethane Spray Adhesive / Polyurethane Tile Adhesive Anti Freezing
PU Foam Spray (Construction Foam/Fixing Foam/Window Foam)is a high quality one-component polyurethane foams. Its harden surface can be painted, and the temperature-resistance is from -40℃ to 90℃. It can be adhere to all building materials and applied to insulating and filling of larger seams, joints, cracks such as gaps tetween walls, windows and doors, unreachable areas around pipes, etc. It has good performances in anti-freezing, anti-moisture, noise-resistant and heat-insulation.
|Name||pu foam adhesive|
|Expansion Multiple(time):||40～ 80|
|Tack-Free Time(min)||Almost 10|
Cutting Time (30mm diameter
|Application Temperature Range(℃)||+5～+35|
|Optimal Application Temp.(℃):||+18～+25|
|Minimum Application temperature(℃)||5|
|Adhesive Strengh(aluminium plate)(KPA)||≥80|
|Adhesive Strengh(with cement mortar)(KPA)||≥60|
|Temperature Tolerance Range(long term)(℃)||-30～+80|
|Temperature Tolerance Range(short term)(℃)||-40～+110|
|formaldehyde and benzene||none|
|Fire Resistant class||/|
|Shelf life(18～22℃)(upright place) (month)||9|
1. Fixing and insulating of door and window frames.
2. Insulating of pipes and filling of holes and gaps.
3. Filling of pipes and filling of holes and gaps.
4. Fixing and insulating of wall panels, corrugated sheels, roof tiles, etc
1. New formula, higer expansion rate and the closed cells reach up to 80%, excellent waterproof performance.
2. Install, fix and insulate of door and window frames ,fill and seal various of gaps, joints and cracks;
3. The foam will adhere to material such as concrete , masonry,metal , wood and plastic , except teflon and silicone.
4. Connecting of insulation materials and roof construction;
5. Insulates and prevents sound & draft;
6. Seals out insects and pests;
7. Interior/Exterior use, easy to operate;
8. High expanding pu foam, save your cost up to 40%;
9. The cured pu foam can be cutted or sanded when fully cured;
10. 100% CFC free,environment-friendly, cured foam is non-toxic.
1. All surfaces should be cleaned from oil, greases, loose particles and dust. Dry surface should be well sprayed with water .
2. The best application temperature between +18 degree C and +25 degree C
3. Shake the bottle for one minute before using. Fill the gaps from bottom to up (pay attention to foam expansion).
4. After using, clean the gun by PU foam cleaner at once.
5. Tack free time is 10 minutes . The foam can be cut after about 30 minutes, the cured time is one hour later , and it will be stable after 3~5 hours .
6. The foam will be decomposed by direct shine of UV ray , so painting or coating is recommended.