Payment & Shipping Terms:
|Product Name:||Polyurethane Foam Cleaner||Volume:||600ml|
|Color:||Colourless||Feature:||Good Dissolving Force|
|Application:||Cleaning The Foam Gun||Raw Material:||Acetone/ Methane / Methyl Alcohol|
600ml Polyurethane Foam Cleaner For Removing Uncured Pu Foam Good Dissolving Force
The Professional PU Foam Cleaner is special designed for removing the uncured (wet) polyurethane foam from hands, tools and gun application. The adapter may be used as a spray attachment, or the can may be connected to the gun to flush the barrel.
Foam cleaner is a necessary cleaning solvent for the use of polyurethane foam sealant to remove dissolved polyurethane foam or other stains. There are currently two main raw materials for cleaning agents: one is acetone, also known as diketone, the other is methane.
The cleaning agent with acetone as the main additive has very good cleaning effect and is generally non-toxic to the human body. The cleaning agent with methane as the main additive has slightly less cleaning effect than acetone, but it is basically innocuous to the human body, and the cost is lower than that of acetone-based cleaning agent,which is popularized in many low-end customers
|Name||Polyurethane Foam Cleaner|
acetone, methane,methyl alcohol
Used for removing the residue of polyurethane foam and cleaning the spray gun. Cleaning should be done before the residue of polyurethane foam is hardened
Note: Dry foam is very difficult to remove. See complete directions on foam can.
Keep away from heat, sparks, flames and static electricity;
Turn off sources of ignition (pilot light etc.).
Use in well-ventilated areas.
Keep out of the reach of children.
Can is under pressure. Do not burn or pierce, even after use.
In case of eye contact, flush with water and get immediate medical attention
Keep away from direct sunlight and do not expose temperatures over 50℃.
Store in upright position.
Shake the aerosol can for at least 30 seconds.
Spray the PU Foam Gun to clean the extra polyurethane foam attached on the gun.
Fit the gun on the adapter. Firmly screw the can on the adapter and turn the flow adjustment screw.
Gun out the cleaner to clean the gun.
Clean the extra polyurethane foam on skin, tools, floor, clothes and so on.